Eastar? 5011
共聚多酯
Product Descript ion:
Eastar? Copolyester 5011 is a glycol modified polyethylene terephthalate(PET). The modification is made by adding a second glycol, cyclohexanedimethanol (CHDM) during the polymerization stages. The second glycol is added in the proper proportion to produce an amorphous polymer.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED?.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED? Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more informationabout GEI and to obtain printable certificates for Eastman? Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products.
This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED?.
The GREENGUARD INDOOR AIR QUALITY CERTIFIED? Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information
| 總覽 | ||||
材料狀態 |
| |||
資料 1 | ||||
UL 黃卡 2 | ||||
搜索 UL 黃卡 | ||||
供貨地區 |
| |||
特性 |
| |||
用途 |
| |||
形式 |
|
| 物理性能 | 額定值 | 單位制 | 測試方法 |
密度 / 比重 | 1.28 | g/cm3 | ASTM D792 |
收縮率 - 流動 | ASTM D955 | ||
1.60 mm | 0.50 | % | |
3.20 mm | 0.20 | % | |
吸水率 (24 hr, 23°C) | 0.13 | % | ASTM D570 |
| 硬度 | 額定值 | 單位制 | 測試方法 |
洛氏硬度 (R 級, 23°C) | 106 | ASTM D785 |
| 機械性能 | 額定值 | 單位制 | 測試方法 |
抗張強度 (斷裂, 23°C) | 25.0 | MPa | ASTM D638 |
伸長率 (斷裂, 23°C) | 30 | % | ASTM D638 |
彎曲模量 (23°C) | 2200 | MPa | ASTM D790 |
彎曲強度 (23°C) | 75.0 | MPa | ASTM D790 |
| 沖擊性能 | 額定值 | 單位制 | 測試方法 |
懸壁梁缺口沖擊強度 | ASTM D256 | ||
-40°C | 28 | J/m | |
23°C | 69 | J/m | |
無缺口懸臂梁沖擊 | ASTM D4218 | ||
-40°C | 2600 | J/m | |
23°C | 無斷裂 |
| 熱性能 | 額定值 | 單位制 | 測試方法 |
載荷下熱變形溫度 | ASTM D648 | ||
0.45 MPa, 未退火 | 67.0 | °C | |
1.8 MPa, 未退火 | 62.0 | °C |
| 光學性能 | 額定值 | 單位制 | 測試方法 |
透射率 (總計) | 90.0 | % | ASTM D1003 |
霧度 | 0.300 | % | ASTM D1003 |
| 注射 | 額定值 | 單位制 | |
干燥溫度 | 71 | °C | |
干燥時間 | 4.0 到 6.0 | hr | |
加工（熔體）溫度 | 249 到 271 | °C | |
模具溫度 | 16 到 38 | °C |
| 備注 |
| 1通過這些鏈接您能夠訪問供應商資料。我們盡量保證及時更新資料；不過您可以從供應商處了解新資料。 |
| 2UL 黃卡含有 UL 驗證的易燃性和電氣特性。UL Prospector 持續努力在 Prospector 中將黃卡鏈接至單個塑料材料，然而此列表可能未包括所有相應鏈接。重要的是，我們對 Prospector 中找到的這些黃卡和塑料材料之間的關聯進行驗證。如需完整的黃卡列表，請?jiān)L問 UL 黃卡搜索。 |
簡繁切換